LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL, 1.5L 4-CYL, 1.75L 4-CYL & 1.8L 4-CYL >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

  1. Using new gaskets and "O" rings, reassemble pump in reverse order of disassembly. Make sure rotors are installed in their original positions.
  2. Place oil pickup in container of oil and operate pump with screwdriver to prime pump. Place finger over outlet hole and check that pressure is created as pump is turned. Install oil pump in reverse order of removal procedures.
scientia non olet · About LEMON Manuals