LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL, 1.5L 4-CYL, 1.75L 4-CYL & 1.8L 4-CYL >> Crankshaft Main & Connecting Rod Bearings >> Front Main Bearing Oil Seal

Front Main Bearing Oil Seal

  1. To replace front main bearing oil seal, use procedures set forth for rear main bearing oil seal.
  2. Install seal with part number side facing outward. Using oil seal driver tool (07947-SB00200) for 1.8L engines or (07947-6340000) for all other engines, drive in oil seal until it bottoms against block.
scientia non olet · About LEMON Manuals