LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Rear Wheel Cylinder >> Reassembly

Rear Wheel Cylinder: Reassembly

  1. Install cups to pistons and coat cylinder bore, pistons and cups with brake fluid.
  2. Apply sealant between wheel cylinder and flange plate whenever separated.
  3. Reverse disassembly procedure, and install parts in cylinder bore. Install dust covers securely in cylinder body grooves.
NOTE: If fluid contamination or corrosion is found, use clean brake fluid to bench bleed master cylinder and bleed hydraulic system. Brake fluid must be DOT 3 rated or better. Do not use gasoline, kerosene, antifreeze, alcohol or any other cleaner containing mineral oil or damage to rubber parts will result.
Fig 1: Exploded View of Master Cylinder Assembly Replace both piston assemblies whenever disassembled.
G50062
scientia non olet · About LEMON Manuals