LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Disc Brake Caliper >> Disassembly

Disc Brake Caliper: Disassembly

  1. Remove retaining snap ring (if equipped) and piston dust boot. Place rags in front of piston to prevent damage during removal.
  2. Force piston out of caliper bore by applying 30 psi (2.1 kg/cm2 ) air pressure to brake fluid inlet port. Remove and discard piston square ring seal without damaging cylinder bore. See Fig 1 and Figure .
Fig 1: Exploded View of Front Disc Brake Caliper Applies to all Civic models except Wagon. Accord and Prelude are similar.
G50060
scientia non olet · About LEMON Manuals