LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustment >> Rear Wheel Spindle Nut

Rear Wheel Spindle Nut

  1. Tighten spindle nut to 14-22 ft. lbs. (20-30 N.m) and manually turn brake drum. Loosen spindle nut. Retighten spindle nut to 48 INCH lbs. (5 N.m).
  2. Install pin holder with slots as close as possible to hole in spindle. Tighten enough to align slot with hole and install cotter pin.
scientia non olet · About LEMON Manuals