LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Ball Joint >> Removal (Lower)

Removal (Lower)

  1. Remove steering knuckle. See Steering Knuckle in this article. Remove dust boot snap ring and remove dust boot. Remove ball joint snap ring, and tighten ball joint nut on ball joint remover (07965-SB00100).
  2. Position ball joint removal base (07965-SB00200) between ball joint housing and knuckle. Press ball joint out of knuckle.
scientia non olet · About LEMON Manuals