LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Civic 1500 GL, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL, 1.5L 4-CYL, 1.75L 4-CYL & 1.8L 4-CYL >> Crankshaft Main & Connecting Rod Bearings >> Crankshaft End Thrust

Crankshaft End Thrust

  1. Attach a dial indicator to engine with indicator point on end of crankshaft. Push crankshaft away from dial indicator and zero dial indicator.
  2. Firmly pull crankshaft towards dial indicator and record measurement. If not within specification, inspect thrust washers and thrust surface of crankshaft.
  3. Replace worn parts as necessary. Thrust washer thickness is fixed. DO NOT  change thrust washer thickness by grinding or shimming.
scientia non olet · About LEMON Manuals