Shift Solenoids No. 1 & 2
The PCM controls transmission shifting by delivering an output signal to operate appropriate shift solenoid. Shift solenoids are located on transmission valve body. Shift solenoids are operated in accordance with shift lever range. If a shift solenoid malfunctions, PCM will select a gear. See FAIL SAFE GEAR POSITION table.
FAIL SAFE GEAR POSITION
| Position/Application | Solenoid No. 1 Failure | Solenoid No. 2 Failure | Solenoid No. 1 & 2 Failure | |
|---|---|---|---|---|
| "D" | ||||
| 1st Gear | 3rd | 1st | OD | |
| 2nd Gear | 3rd | OD | OD | |
| 3rd Gear | 3rd | OD | OD | |
| OD Gear | OD | OD | OD | |
| "2" | ||||
| 1st Gear | 3rd | 1st | 3rd | |
| 2nd Gear | 3rd | 3rd | 3rd | |
| "L" (1st Gear) | 1st | 1st | 1st | |