LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1997 >> Tracker Base, 4D Utility, 4WD, Standard >> Repair and Diagnosis (Single Page) >> General Information >> Restraints >> Supplemental Inflatable Restraint System - Air Bag Deactivation Procedures >> Ford Motor Co. >> Disabling & Activating Air Bag System >> Disabling System (Explorer, Expedition, Mountaineer & Ranger)

Disabling System (Explorer, Expedition, Mountaineer & Ranger)

  1. Disconnect negative battery cable. Wait at least one minute. This is the time required for back-up power supply in diagnostic monitor to deplete its stored energy.
  2. Remove driver-side air bag from vehicle. See DRIVER-SIDE AIR BAG MODULE . Attach air bag simulator to air bag connector to simulate driver-side air bag. See AIR BAG SIMULATOR APPLICATION  table.
  3. Remove passenger-side air bag module. See PASSENGER-SIDE AIR BAG MODULE . Attach air bag simulator to air bag connector to simulate passenger-side air bag. See AIR BAG SIMULATOR APPLICATION  table.