Disabling System (Contour, Mystique & Windstar)
- Record preset radio station frequencies. Disconnect negative battery cable. Disconnect positive battery cable. Wait at least one minute. This is the time required for back-up power supply in diagnostic monitor to deplete its stored energy.
- Remove driver-side air bag module. See DRIVER-SIDE AIR BAG MODULE . Install Air Bag Simulator (Rotunda 105-00010) to air bag module harness connector to simulate air bag. See Figure. A trouble code will set if an incorrect air bag simulator is installed.
- Remove passenger-side air bag module. See PASSENGER-SIDE AIR BAG MODULE . Install Air Bag Simulator (Rotunda 105-00010) to air bag module harness connector to simulate air bag. A trouble code will set if an incorrect air bag simulator is installed. Connect positive battery cable. Connect negative battery cable.