Front Disc Brake Caliper: Reassembly

To reassemble, reverse disassembly procedure. Lubricate piston seal, piston and caliper bore with brake fluid. Position piston in caliper so it protrudes .4" (10 mm) out of cylinder end. On all models, install dust boot seal ring. See Fig 1 or Fig 2.

Fig 1: Exploded View Of Front Disc Brake Caliper (Metro & Firefly (Canadian) & Tracker)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Exploded View Of Front Disc Brake Caliper (Prizm)

Courtesy of GENERAL MOTORS CORP.