LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1997 >> Tracker Base, 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments >> Rear Brake Shoes >> Prizm & Tracker

Prizm & Tracker

  1. Raise and support vehicle. Remove wheel and brake drum. Install drum-to-shoe Clearance Gauge (J-22364-01) so gauge measures inside diameter of brake drum. Remove and reverse gauge to measure brake shoe linings.
  2. Position gauge over brake shoe lining. Turn self-adjuster until primary and secondary brake shoes contact gauge. Reinstall brake drum and wheel. Lower vehicle. Check brake fluid. Road test vehicle for proper brake system operation.
scientia non olet · About LEMON Manuals