LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1996 >> Tracker Base, 4D Utility, 4WD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL >> Removal & Installation >> Oil Pan >> Installation (2-Wheel Drive)

Installation (2-Wheel Drive)

  1. Apply Sealant (1052914) to oil pan seal surface before installation. Install NEW "O" ring on oil pump pick-up tube. Install oil pump pick-up tube and oil pan.
  2. Tighten oil pan bolts to specification, starting at center and moving outward. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals