LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Tracker Base, 1.6 6, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [U,6] >> Overhaul >> Rod Bearings

Rod Bearings

  1. Note direction of connecting rod and cap before disassembly. Install connecting rod with oil hole toward intake manifold side of engine. See Figure. Ensure arrow mark on connecting rod cap points toward timing belt end of engine.
  2. Ensure bearing oil clearance and side play are within specification. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS  and CONNECTING RODS  tables under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals