Pressure Limit & Pressure/Differential Valves: Removal
- Disconnect negative battery cable. Remove air cleaner. Disconnect master cylinder fluid level sensor connector. Clean outside of brake fluid reservoir. Using a syringe, remove as much fluid from reservoir as possible. Remove heat shield. Unplug pressure/differential valve electrical connector. Unplug pressure limit valve electrical connector.
- Disconnect brake hydraulic lines which lead from master cylinder to wheels. Remove heat protector bolt from master cylinder bracket. Remove 2 master cylinder attaching bolts. Remove master cylinder, pressure/differential valve and pressure limit valve assembly from vehicle. Remove pressure limit valve. Remove pressure/differential valve.