LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Tracker Base, 1.6 6, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Rear Brake Shoes

Rear Brake Shoes

  1. Raise and support vehicle. Remove wheel and brake drum. Install drum-to-shoe Clearance Gauge (J-22364-01) so gauge measures inside diameter of brake drum. Remove and reverse gauge to measure brake shoe linings.
  2. Position gauge over brake shoe lining. Turn self-adjuster until primary and secondary brake shoes contact gauge. Reinstall brake drum and wheel. Lower vehicle. Check brake fluid. Road test vehicle for proper brake system operation.
scientia non olet · About LEMON Manuals