LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Tracker Base, 1.6 6, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Testing >> Hazard Warning Switch Test

Hazard Warning Switch Test

  1. Ensure hazard fuse and turn signal relay are okay. Relay, used in place of flasher, is mounted on top of fuse block, under left instrument panel. Remove hazard fuse from fuse block. Push hazard switch to ON position.
  2. Locate combination switch 20-pin harness connector under instrument panel, near steering column. Check for continuity between White/Green wire and Yellow/White wire connector terminals. If no continuity exists, replace combination switch.
scientia non olet · About LEMON Manuals