LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Tracker Base, 1.6 6, RWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Vacuum Booster >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Disconnect brake fluid level sensor connector. Remove master cylinder from vacuum booster. See MASTER CYLINDER  . Disconnect vacuum booster push rod clevis from brake pedal arm. Disconnect vacuum hose from vacuum booster.
  2. Remove vacuum booster attaching nuts. Remove vacuum booster unit. To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals