LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Intake Manifold >> Installation

Intake Manifold: Installation

  1. Install NEW intake manifold gasket. Install NEW injector insulators in intake manifold. Install fuel rail with injectors, ensure injectors rotate freely. If injectors do not rotate freely "O" rings may not be properly installed.
  2. To complete installation, reverse removal procedure. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS  at the end of this article. Fill cooling system.
scientia non olet · About LEMON Manuals