LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Exhaust Manifold >> Removal

Exhaust Manifold: Removal

  1. Disconnect negative battery cable. Remove heat shield from exhaust manifold. If necessary, disconnect oxygen sensor wiring connector. Remove exhaust manifold brace.
  2. Remove warm-up catalyst (California models). Disconnect exhaust pipe from exhaust manifold. Remove exhaust manifold bolts/nuts, exhaust manifold and gasket.
scientia non olet · About LEMON Manuals