LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

  1. To install, reverse removal procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS  at the end of this article.
  2. Adjust all control cables. Adjust fluid levels. On A/T models, fill transaxle with Dexron-II. On M/T models, fill transaxle with SAE 75W-90 GL-5 gear lubricant.
scientia non olet · About LEMON Manuals