LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Lubrication >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

  1. To reassemble, reverse disassembly procedure. Install oil seal using seal installer. Coat seal lip with grease. Tighten oil pump cover bolts to specification. See TORQUE SPECIFICATIONS  .
  2. To install, reverse removal procedure. Use new oil pump gaskets. Tighten all bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals