Cylinder Block Specifications
CYLINDER BLOCK
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Cylinder Bore | |||||
| Standard Diameter (1) | |||||
| Size Mark "1" | 3.1890-3.1894 (81.001-81.010) | ||||
| Size Mark "2" | 3.1894-3.1898 (81.010-81.020) | ||||
| Size Mark "3" | 3.1898-3.1902 (81.020-81.030) | ||||
| Cylinder Bore Limit | 3.2177 (81.73) | ||||
| Maximum Taper & Out-Of-Round | .004 (.101) | ||||
| Maximum Deck Warpage | .002 (.05) | ||||
|
|||||