LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1994 >> Prizm Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Crankshaft Rear Oil Seal >> Removal

Crankshaft Rear Oil Seal: Removal

  1. Remove transaxle. Place reference mark on crankshaft and flywheel/drive plate. Remove flywheel/drive plate.
  2. Remove rear plate from cylinder block. Pry seal from seal retainer using care not to damage seal retainer.
scientia non olet · About LEMON Manuals