LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Storm Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Upper Intake Manifold >> Installation (1.8L)

Installation (1.8L)

To install, reverse removal procedure. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS TABLE at the end of this article. Fill cooling system.

Fig 1: Exploded View Of Upper & Lower Intake Manifolds (1.8L)
G91F00393Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals