LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Storm Base, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear >> Adjustments >> Suspension Components

Suspension Components

  1. Raise vehicle by lifting up on rear bumper. Allow vehicle to settle to normal height. Measure distance from floor to center of bumper.
  2. Push down on rear bumper. Allow vehicle to settle to normal height. Measure distance from floor to center of bumper.
  3. The difference between measurements should be less than .5" (12 mm). If difference is greater than .5" (12 mm), inspect rear suspension components for damage or wear.
scientia non olet · About LEMON Manuals