Front Disc Brake Rotor: Installation

Install brake rotor disc on wheel hub. Tighten rotor bolts finger tight. Ensure wheel hub spacer is installed correctly. See Fig 1 . Place hub and disc brake rotor into wheel bearings.

Fig 1: Exploded View Of Hub Assembly
Courtesy of GENERAL MOTORS CORP.
Using a hammer and Hub Driver (J-34856), or block of wood that contacts center of hub, drive hub in knuckle evenly.
To install remaining components, reverse removal procedure. Use NEW drive axle nut during assembly and stake in place. Tighten bolts to specification. See TORQUE SPECIFICATIONS table.