LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

  1. To install, reverse removal procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS TABLE at the end of this article.
  2. Adjust all control cables. Adjust fluid levels. On A/T models, fill transaxle with Dexron-II. On M/T models, fill transaxle with SAE 75W-90 GL-5 gear lubricant.
scientia non olet · About LEMON Manuals