LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Prizm Base, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Hub & Knuckle Assembly >> Removal

Hub & Knuckle Assembly: Removal

  1. Raise and support vehicle, allowing suspension to hang freely. Remove wheel and brake drum (if equipped). Remove axle hub. See REAR AXLE HUB ASSEMBLY .
  2. Remove brake line from hose and backing plate. Remove strut rod from knuckle. Disconnect both lateral links from knuckle. See Figure. Disconnect strut assembly from knuckle. Remove knuckle assembly.
scientia non olet · About LEMON Manuals