Fuel Gauge Indicates "F" At All Times
- Unplug fuel gauge sending unit connector located under rear seat. Turn ignition on. If fuel gauge does not indicates "E", replace fuel gauge sending unit.
- If fuel gauge still indicates "F", unplug 10-pin (Gray) instrument panel cluster assembly connector located behind instrument panel cluster assembly. Using a DVOM, check resistance between instrument cluster connector terminal No. 6 (Yellow/Red wire; Pink wire after splice) to fuel gauge sender unit connector terminal No. 2.
- If resistance is greater than 2 ohms, repair open in Red/Yellow wire; Pink wire after splice) between instrument cluster connector and fuel gauge sender unit. If resistance is less than 2 ohms, check instrument panel cluster printed circuit for cracks and poor connections. If printed circuit is okay, replace fuel gauge.