LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Tracker Base, 4WD, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear >> Adjustments & Inspection >> Load-Sensing Proportioning Valve (LSPV)

Load-Sensing Proportioning Valve (LSPV)

  1. Park vehicle on level surface. Remove all luggage and passengers. Ensure fuel tank is full and spare tire and jack are installed correctly.
  2. Push LSPV against stopper bolt. Measure spring length. Spring length should be 3.9" (99 mm). If spring length is not within specification, adjust stopper bolt until correct length is obtained.