LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Tracker Base, 4WD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [U] >> Removal & Installation >> Rocker Arm Shafts >> Removal

Rocker Arm Shafts: Removal

  1. Remove timing belt. See TIMING BELT under REMOVAL & INSTALLATION. Remove air cleaner assembly and valve cover.
  2. Insert a .35" (9 mm) diameter rod in hole of camshaft to hold camshaft during camshaft sprocket removal. See Figure . Remove retaining bolt and camshaft sprocket.
  3. Fully loosen all valve adjusting screws. Remove rocker arm shaft retaining screws. See Figure . Note location of rocker arm components for reassembly reference. Remove rocker arms shafts and components.
scientia non olet · About LEMON Manuals