LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Tracker Base, 4WD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [U] >> Removal & Installation >> Camshaft >> Inspection

Removal & Installation: Camshaft: Inspection

  1. Inspect components for damage. Measure camshaft lobe height and journal runout. Replace camshaft if not within specification. See CAMSHAFT table under ENGINE SPECIFICATIONS at end of article.
  2. Measure cylinder head camshaft bore and camshaft journal diameter. Determine camshaft oil clearance. Replace camshaft or cylinder head if oil clearance is not within specification. See CAMSHAFT table under ENGINE SPECIFICATIONS at end of article.
scientia non olet · About LEMON Manuals