LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Storm Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Lubrication >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

  1. To reassemble, reverse disassembly procedure. Install oil seal using Seal Installer (J-25337). Tighten oil pump cover bolts to specification. See TORQUE SPECIFICATIONS table.
  2. To install, reverse removal procedure. Apply Sealant (1052917) to oil pump gasket surface before installing oil pump. Tighten all bolts to specification.
scientia non olet · About LEMON Manuals