Cylinder Block Specifications
WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK SPECIFICATIONS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| 1.3L | ||||||
| Cylinder Bore | ||||||
| Standard Diameter (1) | ||||||
| Marked 1 | 2.9138-2.9142 (74.010-74.020) | |||||
| Marked 2 | 2.9134-2.9138 (74.000-74.010) | |||||
| Maximum Taper | .0039 (.10) | |||||
| Maximum Out-Of-Round | .0039 (.10) | |||||
| Maximum Deck Warpage | .002 (.05) | |||||
| 1.6L | ||||||
| Cylinder Bore | ||||||
| Standard Diameter (1) | ||||||
| Marked 1 | 2.9520-2.9524 (75.010-75.020) | |||||
| Marked 2 | 2.9516-2.9520 (75.000-75.010) | |||||
| Maximum Taper | .0039 (.10) | |||||
| Maximum Out-Of-Round | .0039 (.10) | |||||
| Maximum Deck Warpage | .002 (.05) | |||||
|
||||||