Removal (1.3L SOHC)
WARNING: This page is about a different car, the 1992 Suzuki Swift, 1992 Suzuki Sidekick, and 1992 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
- Remove cylinder head valve cover. Remove distributor and distributor case.
- Loosen all valve adjustment lock nuts and valve adjusting screws. Leave screws in place. Remove 10 rocker arm shaft retaining screws. Slide rocker arm shaft(s) out of rear side of head assembly. Remove rocker arms and springs.