LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Metro LSi, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Intake Manifold >> Removal

Intake Manifold: Removal

WARNING: This page is about a different car, the 1992 Suzuki Swift, 1992 Suzuki Sidekick, and 1992 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. See FUEL PRESSURE RELEASE  under REMOVAL & INSTALLATION. Disconnect negative battery cable. Drain cooling system. Remove air intake hoses and air breather hoses.
    WARNING: To avoid severe burns, DO NOT  remove radiator drain plug or cap while engine and radiator are still hot.
  2. Remove air cleaner assembly. Disconnect all electrical connections from intake manifold, injectors and throttle body. Disconnect vacuum hoses from intake manifold.
  3. Disconnect coolant hoses from manifold and throttle body and remove upper radiator hose. Remove fuel supply and return lines from delivery pipe. On all models, disconnect all control cables.
  4. Remove intake manifold-to-cylinder head bolts. Remove intake manifold and throttle body and gasket. Remove remaining components from intake manifold as required.
scientia non olet · About LEMON Manuals