LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Metro LSi, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

WARNING: This page is about a different car, the 1992 Suzuki Swift, 1992 Suzuki Sidekick, and 1992 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

Lower engine and transmission into vehicle. Install engine mountings to brackets. Install bolts into frame brackets. Tighten bolts to specifications. See TORQUE SPECIFICATIONS  table. Replace cooling system, engine and transmission fluids. To complete installation, reverse removal procedure.



Lower engine and transmission into vehicle. Install engine mountings to brackets. Install bolts into frame brackets. Tighten bolts to specifications. See TORQUE SPECIFICATIONS  table. Replace cooling system, engine and transmission fluids. To complete installation, reverse removal procedure.

NOTE: On Swift, remove engine and transmission as an assembly.


Lower engine or engine and transmission into vehicle. Install engine mountings to brackets. Install bolts into frame brackets. Tighten bolts to specifications. See TORQUE SPECIFICATIONS  table. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals