Post-Collision Air Bag Safety Inspection
POST-COLLISION AIR BAG SAFETY INSPECTION
| Action | Components |
|---|---|
| Replace After Deployment | * Air Bag Module(s) * Sensing & Diagnostic Module (SDM) * Sensors In Area Of Damage |
| Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) | * Instrument Panel Braces * Instrument Panel Steering Column Reinforcement Plate * Knee Bolsters & Mounting Points * Seat Belts & Mounting Points * Sensors In Area Of Accident Damage (Without Deployment) * SIR Coil Assembly * Steering Column |
| Comments | * If any components are damaged or bent, they must be replaced. * SRS wiring can be repaired following manufacturer's instructions. - 1996 Metro/Firefly Only - 1995-96 Metro Only |
POST-COLLISION AIR BAG SAFETY INSPECTION
| Action | Components |
|---|---|
| Replace After Deployment | * Air Bag Module * Arming Sensor * Forward Discriminating Sensor * Passenger Compartment Discriminating Sensor |
| Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) | * Instrument Panel Braces * Instrument Panel Steering Column Reinforcement Plate * Knee Bolster & Mounting Points * SIR Coil Assembly * Steering Column |
| Comments | * If any components are damaged or bent, they must be replaced. * SRS wiring can be repaired following manufacturer's instructions. |