LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Metro LSi, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Rear Crankshaft Oil Seal >> Removal

Rear Crankshaft Oil Seal: Removal

WARNING: This page is about a different car, the 1992 Suzuki Swift, 1992 Suzuki Sidekick, and 1992 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.

Remove engine or engine and transmission. See ENGINE  under REMOVAL & INSTALLATION. Separate transmission from engine. Remove flywheel. Remove oil seal housing. Remove seal. Inspect oil seal housing for wear or damage. Repair or replace as necessary. See Figure .

scientia non olet · About LEMON Manuals