LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Metro LSi, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (1.3L 4-CYL - VIN [3] & 1.6L 4-CYL - VIN [0]) >> Removal & Installation >> Cylinder Head Disassembly (1.3L DOHC)

Cylinder Head Disassembly (1.3L DOHC)

WARNING: This page is about a different car, the 1992 Suzuki Swift, 1992 Suzuki Sidekick, and 1992 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head. See CYLINDER HEAD  under REMOVAL & INSTALLATION. Remove manifolds with throttle body, distributor assembly and delivery pipe with injectors. Remove camshaft. See CAMSHAFT  under REMOVAL & INSTALLATION.
  2. Use Valve Spring Compressor (09916-14510) and Valve Spring Retainer Remover (09916-84510) to remove retainer locks. See Figure . Remove retainers, springs, spring seats and valves. Keep all components in order for reassembly reference.
scientia non olet · About LEMON Manuals