Removal & Installation: Camshaft: Installation
WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate camshaft lobes and camshaft bearing journals. Install camshaft and new oil seal in cylinder head. On DOHC model, install oil seal flush with bearing cap surface. Install camshaft bearing caps and tighten in sequence. See Fig 1 .
- On all models, install camshaft sprocket. Ensure camshaft sprocket marks align with timing marks on cylinder head. See Figure and Figure . To complete installation, reverse removal procedure.