Removal & Installation: Camshaft: Inspection
WARNING: This page is about a different car, the 1991 Suzuki Swift, 1991 Suzuki Sidekick, and 1991 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
- Check cam lobes and journals for wear and damage. Use Plastigage to check bearing clearance. If wear exceeds specification, repair or replace as necessary. See CAMSHAFT table under ENGINE SPECIFICATIONS.
- Use dial indicator and "V" blocks to measure camshaft runout at center of shaft. If wear exceeds specifications, repair or replace as necessary. See CAMSHAFT table.