LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Metro Base, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (1.0L 3-CYL - VIN [5] & 1.0L 3-CYL Turbo - VIN [2]) >> Removal & Installation >> Valve Guides Service >> Removal

Valve Guides Service: Removal

WARNING: This page is about a different car, the 1988 Chevrolet Sprint. However, it is still accessible from the selected car via links, so may be relevant.

Remove valve springs, retainers, valves, valve guide oil seals and valve spring seats. Place disassembled parts in order, so they can be installed in their original positions. Using Valve Guide Remover/Installer (J-34833), drive valve guide out from combustion side to valve spring side.

scientia non olet · About LEMON Manuals