LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Metro Base, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (1.0L 3-CYL - VIN [5] & 1.0L 3-CYL Turbo - VIN [2]) >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

WARNING: This page is about a different car, the 1988 Chevrolet Sprint. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove rocker cover. Loosen valve adjuster lock nuts and back off adjusting screws. Remove rocker shaft mounting bolts and rocker shafts.
  2. Remove distributor, fuel pump and fuel pump push rod. Remove crankshaft pulley, timing belt outer cover and timing belt. See TIMING BELT . Using Camshaft Lock Holder (J-34836) to hold camshaft pulley, loosen pulley bolt. Remove bolt, pulley and camshaft from cylinder head.
scientia non olet · About LEMON Manuals