LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Metro Base, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (1.0L 3-CYL - VIN [5] & 1.0L 3-CYL Turbo - VIN [2]) >> Overhaul >> Rear Main Oil Seal >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1988 Chevrolet Sprint. However, it is still accessible from the selected car via links, so may be relevant.

Remove oil pan. Remove clutch, pressure plate and flywheel. Remove rear main seal housing. Remove seal from housing. Install new seal in housing. Install new gasket. Lubricate seal and install housing onto block. Trim gasket even with oil pan mounting surface on block.

scientia non olet · About LEMON Manuals