LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Prizm Base, 4D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Neutral Safety Switch Adjust >> Prizm GSI

Prizm GSI

  1. Set parking brake. Place gearshift in Neutral. Raise and support vehicle. Remove lower covers for access to transaxle. Remove retaining nut and shift lever from transaxle.
  2. Remove staked area from retaining nut on shaft for manual shift lever on transaxle. Loosen neutral safety switch mounting bolts. See Figure. Rotate neutral safety switch so flat areas on manual shift valve are parallel to switch mark.
  3. Tighten mounting bolts to 44 INCH lbs. (5 N.m). Restake retaining nut for manual shift lever. Install shift lever and retaining nut. Tighten retaining nut to 22 ft. lbs. (30 N.m). To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals