Transmission Specifications
TRANSMISSION SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Countershaft End Play | .009-.035 (.23-.89) | |
| Countershaft Height | 1.311-1.398 (33.30-35.50) | |
| Bushing Inside Diameter | ||
| Direct Clutch | 1.853 (47.07) | |
| Oil Pump Body | 1.503 (38.18) | |
| Ring Gear Flange | .749-.750 (19.03-19.05) | |
| Stator Shaft | ||
| Front | .849 (21.57) | |
| Rear | 1.066 (27.07) | |
| Sun Gear Flange | .867-.868 (22.03-22.05) | |
| Underdrive Clutch (Front) - Standard | 1.831-1.832 (46.50-46.55) | |
| Underdrive Clutch (Front) - Maximum | 1.833 (45.57) | |
| Underdrive Clutch (Rear) - Standard | 2.165-2.167 (55.00-55.03) | |
| Underdrive Clutch (Rear) - Maximum | 2.169 (55.08) | |
| Input Shaft End Play | .012-.035 (.30-.90) | |
| Piston Stroke | ||
| Direct Clutch - A-240E | .045-.059 (1.13-1.50) | |
| Direct Clutch - A-240L | .054-.067 (1.37-1.70) | |
| Direct Clutch - A-241L & A-241E | .044-.058 (1.11-1.47) | |
| Direct Clutch - A-243L & A-244E | .064-.078 (1.63-1.97) | |
| Forward Clutch - A-244E | .044-.058 (1.11-1.47) | |
| Forward Clutch - All Other Transaxles | 056-.071 (1.42-1.81) | |
| Underdrive Clutch - A-240E & A-241L | .058-.074 (1.47-1.89) | |
| Underdrive Clutch - A-240L, A-243L & A-244E | .059-.073 (1.50-1.86) | |
| Underdrive Clutch - A-241E | .048-.061 (1.21-1.55) | |
| 2nd Coast Brake | .059-.118 (1.50-3.00) | |
| Planetary Pinion Gear Thrust Clearance | .008-.020 (.20-.50) | |
| Side Gear Backlash | .002-.008 (.05-.20) | |