Stall Speed Test Results:
- Stall Speed Is Same In Both Positions, But Less Than Specified
Insufficient engine output or defective stator one-way clutch.NOTE: If stall speed RPM is greater than 600 RPM lower than specification, torque converter may be faulty. - Stall Speed High In "D" Position
Low line pressure, forward clutch slipping or defective No. 2 one-way clutch or underdrive one-way clutch. - Stall Speed High In "R" Position
Low line pressure, direct clutch, 1st and reverse brake or underdrive brake slipping. - Stall Speed High In Both Positions
Low line pressure, improper fluid level or underdrive brake slipping.