Rear Planetary Gear: Reassembly

Coat all parts with ATF. Install one-way clutch into outer race. Flanged side should face inward away from shiny side of outer race. See Fig 1. Install side retainers and snap rings.
Install planetary gear into one-way clutch. Planetary gear inner race should face inward from back side of outer race. Check operation of one-way clutch. See Fig 1. Coat thrust washers with petroleum jelly. Install thrust washers on both sides of gear, aligning thrust washer tab with hollow area in gear.

Fig 1: Installing & Checking No. 2 One-Way Clutch

Fig 2: Exploded View Of Rear Planetary Gear